D.I.Y. Glitter Ballet Flats

Like most girls, after seeing the wizard of oz I have wanted my very own ruby slippers. If you share the same desire, I have good news! Here is a quick, clean and easy tutorial to help you get just that.
What you will need:
Ballet Flats
Masking tape
Glitter
Glossy Mod podge
Paint brush
Disposable container or tray
Step 1. The first thing you need to do is find a pair of shoes that you would like to cover in glitter. Note that you get better results from using something made of a firm material over something soft and flimsy. In my case I have decided to use an old pair of vinyl ballet flats. Although Dorothy had bows on her shoes I’m going to remove the bows for this project.

Step 2. With masking tape, protect the lining, sole and any other part of the shoe that you don’t want covered in glitter.


Step 3. Grab a disposable container or tray and squeeze some mod podge onto it. Don’t make too much since you will be applying the mix to the shoes in layers. Pour and mix in the glitter depending on how much coverage you wan’t. Remember, you don’t want the mixture to feel like crunchy peanut butter, try to make a smooth paste.
Step 4. Using a paint brush, dab the glitter mix onto your shoes. Let the layer dry before adding another, you will be able to tell when it is dry as mod podge goes on white and turns clear. I removed and reapplied the masking tape after applying each layer of glitter but if you think that that is too time consuming you can choose to leave the masking tape on till the very end and file off any unwanted excess that has dried between the shoe and masking tape.
Step 5. When you are happy with the coverage of your shoe, seal the glitter by painting on a layer of pure mod podge. To cover my black ballet flats I did a total of 3 layers, 4 including the final seal. When the final layer has dried remove the masking tape from your ballet flats.

Excelsior!

Now to find the yellow brick road.

How to turn a large collared shirt into a sleevless mini dress

I picked this large shirt up from an op shop a while ago, it was only $1 and I liked the fabric so i thought ‘why not’. As much as I like oversized shirts I figured it was time I turned it into something more fitting…
What you will need:
Large collared shirt
Scissors
Sewing Pins
Sewing Machine
Iron
Step 1.Put the oversized shirt on inside out. With sewing pins, mark where your waist is (A) and where your arm holes and sides (B) are located. With a pen or pencil, trace the shape leaving a seam allowance of at least 1cm.

Step 2. With a scissors cut along line A and B. You should now have the following pieces:

Step 3. With the shirt inside out, sew the side seams connecting the front and back together again.

Step 4. You can add darts to make the top more fitted. As you can see in the diagram below, the point of the dart is located just below the breast and runs all the way down to the waist. Put the top on inside out for an accurate placement and once again, pin and trace where the dart will go.

Step 5. To sew the dart pinch line A and C together so that they meet and align perfectly. While still pinching pull line B in. Sew along line A&C on the inside of your garment.

Step 6. To get a perfect arm hole, sew 1cm into your garment following the circumference. Remember, you do not need to attach or fold anything at this point as this stitch is just a marker.

Step 7. At the marker stitch, fold the edge of the arm hole in while ironing to keep it in place. You will notice that the stitch will make it easier to maintain the shape of the arm hole.

Once you have ironed all around the arm hole, sew the fold in place.

Step 8. Now it is time to attach the skirt. As you can see, the top is now considerably smaller than the bottom. The first thing you need to do is align the button holes and the buttons by pinning the top and bottom together into place. The next things you need to align are the side seams. Gather all the excess in between the seams and pin into place. Make sure that the button holes, buttons and 2 side seams align perfectly.

Fold the top onto the bottom so that the right sides are facing in. Sew along the waistline that you just pinned to complete the garment.
Ta-da!

From geek to chic!